Pārvades sistēma – ķēdes, kasetes, zobrati un pārslēdzēji

Battery – Shimano BT-DN110-A Di2

123,21 €

7.4 V, 3.7 Wh, 0.5 Ah, compatible charger: SM-BCR2

Battery – Shimano BT-DN300 Internal Di2

132,00 €

3.7 Wh/ 0.5 Ah, 7.4 V, port 3xEW-SD300. Compatible with Dura-Ace Di2 R9250, Ultegra Di2 R8150, 105 Di2 R7150. Compatible charging cable EW-EC300 (not included in delivery).

Battery – Shimano BT-DN320 Di2

42,48 €

7.6 V, 2.32 Wh, 0.5 Ah, compatible charger: EC-DN100

Battery – SRAM eTap / AXS

SRAM

50,76 €

300 mAh, 7.4 V, 24 g, charges in 60 min. or less

Battery charger – Shimano EV-DN100 Di2

33,96 €

For the charging of Shimano Di2 batteries BT-DN320

Battery charger – Shimano SM-BCR2 Di2

77,28 €

For the charging on internal SHIMANO DI2 batteries (BT-DN110, BT-DN110-A), the SM-BCR2 also serves as a PC linkage device for E-TUBE PROJECT firmware updates and settings.

Bearing – Enduro Bearings 6003 LLB ABEC 3

10,61 €

17x35x10 mm, used as a BB bearing for older square-taper BBs, and can also be used as a pivot bearing

Bearing – Enduro Bearings 6806 LLB ABEC 3

10,34 €

30x42x7 mm The most common use for this bearing is as a direct replacement bearing for BB30 and PF30 type BBs (including BB386).

Bearing – Enduro Bearings 6806/28 LLB-E Extended Race ABEC 3 Radial

12,25 €

28x42x7/8 mm The most common use for this bearing is as a direct replacement bearing for the non-drive side beaing on Praxis M30 cranksets.

Bearing – Enduro Bearings 6903 LLB ABEC 3

11,36 €

17x30x7 mm used as a hub bearing, as bottom bracket bearing for some older square taper BBs

Bearing – Enduro Bearings 71806 LLB ABEC 5

15,12 €

30x42x7 mm The most common use for this bearing is as a direct replacement bearing for BB30, PF30 and BB386 and most other bottom brackets with a 30mm OD spindle.