Gultnis – Enduro Bearings MR 24371 LLB ABEC 3

MR 24371 LLB – ABEC-3, Radial Bottom Bracket Bearing for Trek BB90 and SRAM GXP and Shimano 24mm cranksets – 24mm x 37.1mm x 7mm –

ABEC-3 Radial Bottom Bracket Bearing featuring 52100 High-Carbon chromium alloy races paired with grade 10 Balls with 90% fill, high-pressure, water-proof grease.

This is a unique custom bearing that is not used a lot, but when you need it, its a major problem solver.

Trek BB90 bottom brackets require the bearing to be directly pressed into the BB shell that is often made from material that is softer than steel, and over time quite often the bearing seat can become slightly oversized from use. These replacement bearings have been made just slightly oversized (0.1mm) to compensate. This version features a 24mm IDused for Shimano 24mm cranksets and SRAM GXP non-drive-side installation. For drive-side SRAM GXP cranks we also make MR22371 for the same oversized BB90 issue.

The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.

Static load – 726lbf / 3.22kN
Weight – 31.1g